OnlineRME Help System

Setting up properties for reporting

Owned by OnlineRME, LLC
Last updated: Jun 23, 2024
2 min read

This step is required for all reporting. If the field is left blank the contractors will not be able to file a report. County staff are the only users that can set the field.

In order for the correct fees to be collected for maintenance reporting, the system category must be established.

  1. Search for the property. If it is not in the system, add a new property.

  2. If the property is also a short term rental, make sure to update the site Classification to Short Term Rental.

  3. Once you are on the property, and are ready to set the system category, click on the Septic Components menu item:

    image-20240623-152022.png

     

  4. Next select the category. Fees are attached to ATT, Holding Tank, Pressure and Sandfilter.

    image-20240623-155906.png

     

  5. Finally, once the correct system category is selected, Click on the Update System Information button.

 

It is important to note that this step covers the category step that the county must do to enable reporting. The components also must be setup, which can be done by the county or the contractor. The component setup is based upon the as-built of the system construction.